NARDA EFC 400 Vs Binrad
EFC 400 is a well-known software in the industry for many years.
Binrad simulation software is being used for almost 3 years.
Both softwares calculate magnetic field for transformers, cabinet, cables and Electric poles.
They display the results in two and three dimension graphic screen.
You can download NARDA EFC 400 demo from the following link:
https://www.narda-sts.com/en/servicesupport/software-updates-and-firmware/efc-400/
A comparison was made between Narda EFC-400 ST and Binrad Edison Low Frequency.
It includes several projects, the results are shown below.
The results are practically identical.
The projects (of both Narda and Binrad) can be downloaded at the link above.
Binrad |
Narda |
|
|---|---|---|
| 100A Cabinet | ||
| CABLE 100A D-35MM INS-0.5MM | ||
| TRAFO 630KVA | ||
| Electric pole |
Summary of the capability differences
Binrad |
Narda |
|
|---|---|---|
| Three dimension Screen |  |
|
Map crop | |
 |
| Format jpg, bmp, tiff and dxf | |
|
| Format pdf, dwg | |
|
| Electric objects library | |
|
| Explanation of software usage | Personal training by Remote PC Connection | One day course in Germany |
| Frequency range | 50 – 60 Hz | 50 – 60 Hz |
| Calculation area | Unlimited | 150 x 150 m |
| Number of maps in a project | 20 | 1 |
Software usage
You can download NARDA EFC 400 demo from the following link:
https://www.narda-sts.com/en/service-and-support/software-updates-and-firmware/efc-400/
The Binrad software can be download from the link:
https://www.binrad.com/downloads/
Narda EFC 400 use dongle while Binrad use web activation license.